Transmitters, isolation amplifiers

• Input: 0 (4) … 20 mA, 0 … 10 V
• Accuracy class: 0,08 %
• Test voltage: 4 kV AC
• Basic insulation: 1000 V AC/DC
• Power supply: 20 … 253 V AC/DC
• Rapid response: 10 kHz cutoff frequency
• Certification: CE, cULus, GL, EAC, KTA

Input: 0 (4) … 20 mA, 0 … 10 V
Accuracy class: <0,2 %
Test voltage: 3 kV AC
Isolation: 300 V AC/DC
Power supply: 24 … 110 V DC
Certification:
Use on rolling stock (EN 50155)
Fire protection (HL3) EN 45545-2

• Doubling, Conversion, and Isolation of Speed Sensor Signals
• Speed sensors with current or voltage output can be connected
• Test voltage: 8.8 kV AC
• Functionally safe signal processing according to EN 50129 (SIL 4 and SIL 2)
• Suitable for use on rolling stock: EN 50155, EN 50153

• Input: 0 (4) … 20 mA, 0 … 10 V
• Output: 2 electrically isolated outputs, each with full load of 500 Ohms
• Accuracy class: 0,2 %
• Test voltage: 2,5 kV AC
• Basic insulation: 300 V AC/DC
• Width: 6 mm

• Input: 0 (4) … 20 mA
• Accuracy class: 0,1 %
• Test voltage: 2,5 kV AC
• Isolation: 600 V AC/DC
• Power supply: Loop-powered
• Certification: cULus, GL, EAC
• Special features: Width 6 mm, MTBF 1031 years

• Input: 0 (4) … 20 mA, 0 … 10 V
• Accuracy class: 0,2 %
• Test voltage: 2,5 kV AC
• Basic insulation: 300 V AC/DC
• Width 6 mm

• Input:
  • 0 (4) … 20 mA
• Accuracy class: 0,08 %
• Test voltage: 5,4 kV AC
• Isolation: 600 V AC/DC
• Power supply: Omavoimainen
• Certification: SIL3 / EN 61508 , PL c / e / EN 13849-1, ATEX Zone II; cULus Cl. I, Div 2; GL; EAC
• Special features: Also available as a signal splitter with 2 electrically isolated outputs

• Input: 0 … ±20 mA, 0 … ±10 V, bipolar
• Accuracy class: 0,1 %
• Test voltage: 4 kV AC
• Basic insulation: 1000 V AC
• Power supply: 20 … 253 V AC/DC

• Input: 0 … ±20 mV/200 V, 0 … ±0,1 mA/100 mA, unipolar/bipolar
• Accuracy class: 0,08 %
• Test voltage: 5 kV AC
• Basic insulation: 1000 V AC/DC
• 480 switchable calibrated ranges, 10 kHz cutoff frequency

• Input: ±30 mV … ±1000 V DC, unipolar/bipolar
• Accuracy class: 0,2 %
• Test voltage: 5,4 kV AC
• Basic insulation: 1000 V AC/DC
• Power supply: 20 … 253 V AC/DC

• Input:
  • Resistance thermometers, thermocouples, resistors, shunt voltages up to ±1000 mV
• Accuracy class: 0,1 %
• Test voltage: 2,5 kV AC
• Isolation: 300 V AC/DC
• Power supply: 24 V DC
• Certification: SIL 2 / EN 61508, cURus, EAC, KTA
• Special features: calibrated range selection

• Input: ± 60 mV … ± 100 V DC, unipolar/ bipolar
• Accuracy class: 0,1 %
• Test voltage: 15 kV AC
• Isolation: 3,6 kV AC/DC
• Power supply: 20 … 253 V AC/DC

• The P 41000 AG measures shunt voltages of between 30 and 120 mV
• Precise Measurement of DC Currents in Normal Operation and Measurement of Very High Currents in Overload Conditions with same device.
• Test voltage: 15 kV AC
• Isolation: 3600 V AC/DC

• Input: 60 mV … 10 V AC
• Accuracy class: 0,3 %
• Test voltage: 15 kV AC
• Isolation: 3,6 kV AC/DC
• Power supply: 20 … 253 V AC/DC

• Input: ± 100 V …± 2200 V DC,
  ± 100 V …± 3600 V DC, unipolar/ bipolar
• Accuracy class: 0,3 %
• Test voltage: 15 kV AC
• Isolation: 3,6 kV AC/DC
• Power supply: 20 … 253 V AC/DC

• Input: 10 V … 1200 V AC,
  1200 V … 3600 V AC
• Frequency range: 40 … 1000 Hz
• Accuracy class: 0,5 %
• Test voltage: 15 kV AC
• Isolation: 3,6 kV AC/DC
• Power supply: 20 … 253 V AC/DC

• Input: ± 0.1 … ± 5 A DC, unipolar/ bipolar
• Accuracy class: 0,3 %
• Test voltage: 15 kV AC
• Isolation: 3,6 kV AC/DC
• Power supply: 20 … 253 V AC/DC

• Input: 0.1 A … 5 A AC
• Frequency range: 40 … 1000 Hz
• Accuracy class: 0,5 %
• Test voltage: 15 kV AC
• Isolation: 3,6 kV AC/DC
• Power supply: 20 … 253 V AC/DC

• Input: Pt100 resistance thermometers, 0 … 100 °C, 0 … 200 °C, 0 … 300 °C
• Accuracy class: 0,3 %
• Test voltage: 15 kV AC
• Isolation: 6,6 kV AC/DC
• Power supply: 20 … 253 V AC/DC

• Measurement up to 4500 V DC and 3000 V AC
• Reinforced insulation: up to 3700 V AC/ 4800 V DC
• Suitable for applications with functional safety up to SIL 2 / SIL 3
• Certified for use on rolling stock according to EN 50155

• Input:
  • ± 30 mV … ± 125 V DC
  • unipolar/ bipolar
• Accuracy class: 0,1 % (0.5 R)
• Test voltage: 18 kV AC
• Isolation: 4,8 kV AC/DC
• Power supply: 20 … 253 V AC/DC, 24 V ± 30%
• Special features: Use on rolling stock (EN 50155)
• Fire protection HL3 according to EN 45545-2
• Contact protection according to EN 50153

• Input: ± 100 V … ± 4200 V DC
• unipolar/ bipolar
• Accuracy class: 0,1 % (0.5 R)
• Test voltage: 18 kV AC
• Isolation: 4,8 kV AC/DC
• Power supply: 20 … 253 V AC/DC
• Special features: Use on rolling stock (EN 50155)
• Fire protection HL3 according to EN 45545-2
• Contact protection according to EN 50153

• For measurement of currents up to 20 kA in conjunction with shunt isolators P 41000, P 51000, P 29001, and P 27000.
• accuracy class 0,5 and 0,2
• low temperature coefficient achieved by using manganese-copper-nickel alloy
• MTBF of 96 years for the complete current measurement system
• 5-year warranty

• Input: 0 (4) … 20 mA, 0 … 10 V
• Accuracy: < 0,3 %
• Test voltage: 0,51 kV AC
• Working voltage: 150 V AC/DC
• Power supply: 24 V DC

• Input: 0 (4) … 20 mA, 0 … 10 V
• Accuracy: < 0,3 %
• Test voltage: 1,5 kV AC
• Working voltage: 300 V AC/DC
• Power supply: 24 V DC / 100 … 230 V AC

• Input: Resistance thermometers Pt100, Pt1000, Thermocouples Type J and K
• Accuracy: < 0,2 %
• Test voltage: 1,5 kV AC
• Working voltage: 300 V AC/DC
• Power supply: 24 V DC

• Input: 0 (4) … 20 mA
• Output: two galvanically isolated current outputs which can each drive a load of 400 ohms or 800 ohms when connected in series.
• Accuracy: < 0,3 %
• Test voltage: 1,5 kV AC
• Working voltage: 300 V AC/DC
• Power supply: 24 V DC

• BL 541 (1-channel)
• BL 542 (2-channel)
• Accuracy: < 0,2 %
• Test voltage: 1,5 kV AC
• Working voltage: 300 V AC/DC
• Power supply: Loop-powered

• Input: 0 (4) … 20 mA, 0 … 10 V
• Relay output: 1 changeover contact 240 V AC, 2 A
• Test voltage: 1,5 kV AC
• Working voltage: 50 V AC/DC
• Power supply: 24 V DC

• Input: 0 … 20 mV/200 V, 0 … 100 µA/100 mA
• unipolar/bipolar
• Accuracy: < 0,25 %
• Test voltage: 1,5 kV AC
• Working voltage: 300 V AC/DC
• Power supply: 24 V DC/100 … 230 V AC
• Further functions: Calibrated range selection